Better Business Bureau
My CartUS Company Established 2009
My CartUS Company Established 2009
Top Banner

Industrial RS232 to 3.3V TTL Converter

Model TTL-232-33IE

Category: RS232 / RS485 to TTL Converters

DESCRIPTION

The TTL-232-33IE is an industrial grade bi-directional port powered or external powered RS232 to 3.3V TTL converter which converts a full-duplex RS232 port to a 3.3V TTL signal. A built-in data direction auto-turnaround feature automatically enables the TTL driver when data is present from the RS232 port, eliminating the need for software drivers, and making the device fully plug-and-play. The TTL-232-33IE has a DB9 female connector on the RS232 serial port, and DB9 male connector on the TTL port. A separate terminal block is included with the product. The terminal blocks plugs into the TTL port, providing screw-lug wire terminations for the port. The unit is enclosed in a rugged ABS housing, and is powered from the RS232 data lines or optional 5V external power input. This converter operates from 300 to 115,200 baud.

PORT POWERED WITH OPTIONAL EXTERNAL POWER:

The TTL-232-33IE has an optional 5V DC external power input, The TTL-232-33IE is normally port-powered from the RS232 data lines while using a capacitor charge pump built into the converter to provide necessary power. There are rare instances where the RS232 host device is not capable of port-powering the converter due to signal incompatibilities or low voltage levels. If this should occur, all that is necessary is adding a 5V DC external power to the terminal block or DB9 connector. Because the TTL-232-33IE is industrial grade and port-powered with an optional 5V power input it makes this converter very versatile.

TTL VOLTAGE LEVELS

TTL INPUT TTL OUTPUT
HIGH (>2.0) HIGH (3.3V)
LOW (<0.8)< /td> LOW (0.0V)

FEATURES

  • Plug-and-Play (Hot-pluggable)
  • Port Powered - No External Power Needed
  • Optional 5V External Power Can Be Applied
  • Rugged Industrial Grade Design
  • Data Direction Auto-turnaround - No Flow Control is Necessary
  • Built-in 600W Surge and 15KV Static Protection
  • MTBF(Mean Time Before Failure): 306,000 Hours
  • 5 Year Manufacturer's Warranty
  • RoHS 3, CE, FCC and REACH Certified

PRODUCT COMPLIANCES

  • ROHS
  • FCC
  • CE
  • REACH
Industrial RS232 to 3.3V TTL converter
Industrial RS232 to 3.3V TTL converter plus block
PRICE: $18.95

IN STOCK

30 Day Money Back Guarantee!

5 Year Replacement Warranty!

ISO 9001:2015 QUALITY MANAGEMENT

ISO-9001:2015

Our internationally recognized ISO 9001:2015 Quality Management System (Cert. No. 743003912) with a scope of “Design, Sales, Distribution of Data Communication and IT Support Services“ was recognized and certified by TÜV Rheinland of North America known for its very demanding and stringent requirements. For more details see our Quality Policy.

COMMUNICATION
STANDARDS: EIA/TIA RS-232C Standard
BAUD RATES: From 300 baud To 115,200 baud
CONNECTOR TYPES: RS-232 Side: DB9 Female and TTL Side: either DB9 Male or 4-way Terminal Block
DISTANCE: RS-232 Side: 16 ft (5m) and TTL Side: up to 10 ft (3m)
ELECTRICAL
POWER SOURCE: Port Powered From RS-232 Data Lines - Optional 5V External Power
CURRENT CONSUMPTION: Less Than 10 mA
STATIC PROTECTION: 15KV Electric Static Discharge (ESD) Protection
SURGE PROTECTION: 600W Surge Protection
MECHANICAL
HOUSING: Rugged ABS
WEIGHT: With Terminal Block: 1.2oz (36 grams)
Without Terminal Block: 0.8oz (24 grams)
DIMENSIONS: With Terminal Block: 3.53 X 1.33 X 0.70 in (89.6 X 33.8 X 17.8 mm)
Without Terminal Block: 2.47 X 1.33 X 0.70 in (62.8 X 33.8 X 17.8 mm)
ENVIRONMENTAL
OPERATING TEMP.: -40ºF to 185ºF (-40ºC to 85ºC)
STORAGE TEMP.: -40ºF to 185ºF (-40ºC to 85ºC)
OPERATING HUMIDITY: 5% To 95% - No Condensation
QUALITY
PRODUCT SAFETY: CE, FCC and RoHS Conformance Certified
QUALITY MANAGEMENT: Manufactured and Distributed to ISO 9001:2015 QMS
MEAN TIME BEFORE FAILURE: 306,000 Hours
RELIABILITY: Low Failure Rate - 99+% Reliability Since Inception
WARRANTY: 5 Year Replacement Warranty

RS232 Side DB9 Female

Signal TX RX GND
Pin # 2 3 5
Function TX RX GND

3.3V TTL Side DB9 Male or Terminal Block

Signal IN OUT GND VCC
Pin # 1 2 5 6
Function TTL IN TTL OUT GND 5V OPT

Using one TTL-232-33IE unit:

  1. Check that all connections comply with the connection diagrams.
  2. Perform a loop back test on one unit:
    1. Connect the IN to OUT on the TTL port.
    2. Connect the RS-232 port to the PC RS-232 port.
    3. Running a hyper terminal program on the PC, send ASCII characters to the TTL-232-33IE converter from one PC port, and check that the characters are received at the same PC port. This tests that the transmit and receive functions of the TTL-232-33IE unit is working properly.

Using two TTL-232-33IE units:

  1. Check that all connections comply with the connection diagrams.
  2. Perform a loop back test on two units:
    1. Connect the two TTL ports. Connect OUT to IN and IN to OUT.
    2. Connect the two RS-232 ports to two PC RS-232 ports.
    3. Running hyper terminal programs on both PCs, send ASCII characters to the TTL-232-33IE converter from one PC port, and check that the characters are received at the 2nd PC port. Repeat the test in the opposite direction. This tests that the transmit and receive functions of both TTL-232-33IE units are working properly.

Download FREE FULL VERSION AccessPort Advanced Serial Monitor, Simulation and Data Analysis Software Tool. This software tool is great for testing converters. Supports Windows 98/XP/VISTA/WIN 7/WIN 8/WIN 10.   DOWNLOAD SOFTWARE AND USER MANUAL

Below are some of the RS232 to TTL converter applications.

PORT-POWERED MODE:

FIG 1: CONNECTING THE RS-232 PORT TO A 3.3V TTL DEVICE - Port-powered Mode

EXTERNAL POWERED MODE:

FIG 2: CONNECTING THE RS-232 PORT TO A 3.3V TTL DEVICE - 5V External Power Mode

2023 Copyright Protected - Jeddy Ventures LLC - Terms & Conditions - Privacy Statement