Industrial 10/100 Ethernet Surge Suppressor
Model ISO-ETH-P
Category: Opto-Isolated Converters and Surge Suppressors
- General Info
- Specifications
- Pinouts
- Images
- Troubleshooting
- Applications
DESCRIPTION
The ISO-ETH-P is an industrial-grade (wide temperature range) bi-directional passive Ethernet surge suppressor. It can protect any standard 10/100 Ethernet port from voltage peaks and spikes caused by lightning and other power surges. The unit is passive, therefore, no external power or flow control is required. The ISO-ETH-P has a RJ45 on one Ethernet side and an another RJ45 on the other Ethernet side.
The ISO-ETH-P is designed with top quality high response surge arresters, The low capacitance protection provides a clamping voltage with low loss against the high speed signal. The ISO-ETH-P is designed to protect data communication lines in local and wide area networks up to 10/100 Ethernet transmission speeds.
FEATURES
- High Quality Surge Protector Meeting IEC61000-4-5 and ITU-TK20&K21 Standards
- Passive: No Need for External Power
- Plug-and-Play (Hot-pluggable)
- RJ45 Connections for Easy Installation
- Clamping Voltage at 6.8 Volts
- 600W of Surge Protection From Electrical Surges and Lightning Strikes
- MTBF(Mean Time Before Failure): 324,705 Hours
- 5 Year Manufacturer's Warranty
- RoHS 3, CE, FCC and REACH Certified
PRODUCT COMPLIANCES
IN STOCK
30 Day Money Back Guarantee!
5 Year Replacement Warranty!
DATASHEETS
2D CAD DRAWINGS AND 3D MODELS
ISO 9001:2015 QUALITY MANAGEMENT
Our internationally recognized ISO 9001:2015 Quality Management System (Cert. No. 743003912) with a scope of “Design, Sales, Distribution of Data Communication and IT Support Services“ was recognized and certified by TÜV Rheinland of North America known for its very demanding and stringent requirements. For more details see our Quality Policy.
| COMMUNICATION | |
| STANDARDS: | 10Base-T/100Base-TX Standard, IEC61000-4-5 and ITU-TK20&K21 Standards |
| BAUD RATES: | Up to 100 mbps |
| CONNECTOR TYPES: | RJ45 Female Connectors |
| ELECTRICAL | |
| POWER SOURCE: | Passive Device: No Power Needed |
| WORKING VOLTAGE: | 0 Volts to 5 Volts |
| VOLTAGE CLAMP: | 6.8V |
| VOLTAGE LIMIT: | 40 Volts |
| INSERT CONSUMPTION: | <0.5 db |
| Delay Time: | < 1ns |
| MECHANICAL | |
| HOUSING: | Heavy Duty Steel Casing |
| WEIGHT: | 0.35oz (10 grams) |
| DIMENSIONS: | 3.31 X 1.02 X 1.02 in (84.0 X 25.8 X 25.8 mm) |
| ENVIRONMENTAL | |
| OPERATING TEMP.: | -40ºF to 185ºF (-40ºC to 85ºC) |
| STORAGE TEMP.: | -40ºF to 185ºF (-40ºC to 85ºC) |
| OPERATING HUMIDITY: | 5% To 95% - No Condensation |
| QUALITY | |
| PRODUCT SAFETY: | CE, FCC and RoHS Conformance Certified |
| QUALITY MANAGEMENT: | Manufactured and Distributed to ISO 9001:2015 QMS |
| MEAN TIME BEFORE FAILURE: | 324,705 Hours |
| RELIABILITY: | Low Failure Rate - 99+% Reliability Since Inception |
| WARRANTY: | 5 Year Replacement Warranty |
RJ-45 CONNECTORS RJ-45 Female
| Signal | TX+ | TX- | RX+ | N/C | N/C | RX- | N/C | N/C |
| Pin # | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| Function | TX+ | TX- | RX+ | N/C | N/C | RX- | N/C | N/C |
ETHERNET SURGE ARRESTOR FUNCTIONAL DIAGRAM
FIGURE 1: 600W RJ45 SURGE PROTECTOR FUNCTIONAL DIAGRAM
Connect ISO-ETH-P to a working 10M/100M Ethernet connection. If there is continuity in the data stream then it is working.
Download FREE FULL VERSION AccessPort Advanced Serial Monitor, Simulation and Data Analysis Software Tool. This software tool is great for testing converters. Supports Windows 98/XP/VISTA/WIN 7/WIN 8/WIN 10. DOWNLOAD SOFTWARE AND USER MANUAL
Below are some of the RS232 isolator applications.
